The Correct Way Of Using The Rotary Cultivator

Rotary tiller is complete tillage with tractor kit and harrow tillage machinery. Due to the strong have broken soil and tillage after surface smooth, and has been widely used. Proper use and adjust the rotary cultivator, to maintain its good technical status, to ensure the quality of cultivation is very important. Now the rotary cultivator correct use and adjust the technology introduction is as follows:

ler

The adjustment of rotary cultivator

1, level adjustment. Will drag the early with a rotary cultivator parked in the flat ground, reduce the rotary cultivator, make blade 5 cm off the ground, look left point height from the ground are consistent, to ensure the operation of knife axis line, deep tillage evenly.

2, level before and after the adjustment. To plow deeply in need of rotary cultivator, observe whether universal joint Angle and a shaft rotary cultivator is close to the horizontal position. If universal joint Angle is too big, can be adjusted on the pull rod, the rotary cultivator in a horizontal position.

3, hoisting height adjustment. In the rotary tillage operation, universal joint Angle doesn't allow more than 10 degrees, property is not greater than 30 degrees when turning. The ascension of rotary cultivator, therefore, to use a regulating screw position of the handle, screw spacing available; Be especially careful when using the height adjustment, the promotion, such as the need to increase rotary cultivator, should remove universal joint