Rotary cultivator operation appear dislocated solutions have?

May 18, 2023

Leave a message

Rotary cultivator in use process may appear to take off the block machine. Users find rotary cultivator appear to take off the block also don't try so hard, the first to find the cause of the rotary cultivator appear to take off the block, and the reason to choose the appropriate solution. Today we lianyungang rotary cultivator manufacturers to introduce a common cause of rotary cultivator appear to take off the block.

1, the meshing gear rotary cultivator to take off the block release. Machine during operation may cause meshing sets the orientation of steel ball groove axial wear large, makes the rotary cultivator of steel ball produce axial winding.

2, severe tooth tooth surface wear caused by the rotary cultivator to take off the block. Because the rotary cultivator in design chosen for tooth clutch, its inevitable after using a long time there will be a tooth tooth face the serious wear and tear, lead to disorder of the self-locking capability of originally, meshing tooth prone to slip, eventually lead to appear to take off the block.

3, that freedom of axial clearance is too large a rotary cultivator and causes to take off the block. Freedom of axial clearance is too large is usually due to dial the retaining groove and joysticks ball head and wear caused by excessive. Due to large clearance, rotary cultivator in use process as long as the problems will be appeared unsymmetry load change.

Four, spring problem caused by the unsymmetry. Rotary cultivator after long time use, inevitably appear spring force is too small or broken, caused the meshing of axial sliding and take off the block.
 

Send Inquiry