The Use Of Circular Grass Briquetting Machine And Maintenance!

A, the adjustment before use

1, round straw briquetting machine to the requirements of the tractor and the adjustment of the traction rod

In order to ensure the circular grass briquetting machine is safe and effective use of form a complete set of tractor pto must be at least have enough power. In hilly region use or after bundling machine when towing a trailer, make sure the size and weight of the tractor has enough. Adjust the tractor drawbar, make its articulated pin hole is 356 mm from the tractor power output shaft end, is apart from the tractor wheel rim at least 102 mm. Traction rod and in the power output shaft with below CARDS tight, both directions can swing. On some of the tractor, it is necessary to use a piece of articulated plate in order to obtain a suitable distance, when necessary to install a power output shaft conversion device.

2, articulated

Articulated device can be adjusted to make the baling machine with baling room work coordination, traction rod should be as close as possible to a horizontal position. If you use different tractors, hang contact may need to reposition. Connection round straw briquetting machine and tractor can press the following steps:

(1) the baling machine with articulated pin traction rod connected to a tractor. Install a lock nut and cotter pin, to avoid the loss of articulated pin.

Turn the screw jack hand (2) to make jack not bearing, and make the adjustment jack to transport position. Check and confirm the traction rod and baling machine in a horizontal position, if not in a horizontal position, need to change the articulated position.

(3) connect the power output shaft to the tractor.

(4) the power output shaft bracket upward or downward adjustment center, make the power output shaft front levels as much as possible. (5) before the power output shaft bracket must be folded down to the job position.

(6) the traction rod valve tethered to the tractor convenient location.

(7) fixed to the tractor drawbar, safety chain between each fixed point with a u-shaped clamp support.

(8) connect all cables and pipelines tractor hydraulic accessories.